Munsch Products • Chem Resist https://www.chemresist.com/brand/munsch/ Mon, 15 Jul 2024 11:16:14 +0000 en-GB hourly 1 https://www.chemresist.com/wp-content/uploads/2021/08/cropped-favicon-chem-resist-80x80.png Munsch Products • Chem Resist https://www.chemresist.com/brand/munsch/ 32 32 Munsch CM+ Magnetically Coupled Chemical Pump https://www.chemresist.com/fluid-transfer/pumps/munsch-cm-magnetically-coupled-chemical-pump/ Thu, 25 May 2023 12:05:49 +0000 https://www.chemresist.com/?post_type=chem_resist_fluid_t&p=11936 The post Munsch CM+ Magnetically Coupled Chemical Pump appeared first on Chem Resist.

]]>

Unique features

The QUICKFIT and MagPull easy maintenance systems provide quick and easy access without having to remove the pump.

QUICKFIT

The pump casing can be removed from the remaining pump unit within a few minutes while remaining connected to the discharge and suction-side piping.

The QUICKFIT unit can be replaced with the casing staying in line, allowing for the pump to be restarted with a minimum of downtime.

MagPull

Routine maintenance? No problem with the MagPull system! The bearing bracket can be removed from the remaining pump unit with the piping connections remaining connected.

The pump will continue to be hermetically sealed while the bearing bracket and outer magnet assembly are being inspected and serviced.

Chemical Process Pump Performance Data

  • Pump capacity: up to 200 m³/h
  • Total differential head: up to 90 m
  • Operating temperature [t]: up to 180 °C
  • Operating pressure [p]: up to 16 bar

Features and Benefits

  • Replacaeable, thick-walled volute casing with minimum thickness of 10mm without weak welds or joints
  • Innovative single-piece impeller-shaft construction designed for optimal operating reliability
  • Thermocontrol pump monitoring for continuous measurement, with sensors located directly at point of heat dissipation
  • Internal circulation provides perfect plain bearing lubrication, with additional external lubrication options
  • Easy to assemble, replace and maintain within minutes
  • Additional protection for staff and plant with pressure-resistant secondary seals up to 10 bar

Technical Data

  • Models
  • Materials
  • Performance Charts
  • Optional Extras

25-25-125
25-25-160
40-25-125
40-25-160
50-32-125
50-32-160
50-32-200
65-40-200
65-50-125
65-50-160
80-50-200
80-65-160
100-65-160

  • Main material: Silicon carbide
  • O-rings: FFPM, FPM and EPDM
  • Gaskets: TFM 1600, PTFE

1.450 (50hz)
1.750 (60hz)
2.950 (50hz)
3.550 (60hz)

  • Dry run-proof bearings
  • Temperature and vibration monitoring of anti-friction bearings
  • Pressure monitoring of secondary seal
  • Electronic monitoring of outer magnet assembly
  • Thermocontrol – temperature monitoring of process liquid

Suggested Applications

Thanks to the hermetically sealed design, the CM+ is ideal for sensitive areas with high hazard potential – whether for health or the environment. Common applications include:

  • The chemical industry
  • Electrolysis plants
  • Pharmaceuticals
  • Electroplating plants
  • The environmental sector

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch CM+ Magnetically Coupled Chemical Pump appeared first on Chem Resist.

]]> Munsch CS Standardised Chemical Pump https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-cs-standardised-chemical-pump/ https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-cs-standardised-chemical-pump/#respond Mon, 23 Aug 2021 11:25:00 +0000 https://www.chemresist.com/products/fluid-transfer/munsch-cs-standardised-chemical-pump/ The post Munsch CS Standardised Chemical Pump appeared first on Chem Resist.

]]>

Performance Data

  • Pump capacity: up to 200 m³/h
  • Total differential head: up to 90 m
  • Operating temperature [t]: -20°C to +180 °C
  • Operating pressure [p]: up to 16 bar
  • Solids content: up to 5 Vol.-%
  • Particle size: up to 5 mm
  • Diameter of discharge nozzle: DN 25 up to DN 65
  • Drive rating [P]: up to 30 kW

Features and Benefits

  • Impeller types: closed, semi-open or vortex designs
  • Quick and precise pump assembly, no adjustment or alignment work needed for the mechanical seal
  • One mechanical seal fits all pump types
  • Flexible flushing connections that can be retrofitted at any time
  • Suitable for applications with high solid load through ceramic components and a variety of flushing options
  • Wetted parts available in thick-walled polypropylene, PVDF or universally chemically resistant PFA

Munsch pumps

  • Models
  • Materials
  • Performance Charts
  • Optional Extras
  • 40-25-125
  • 40-25-160
  • 50-32-125
  • 50-32-160
  • 50-32-200
  • 65-50-125
  • 65-50-160
  • 65-40-200
  • 80-65-160
  • 80-50-200
  • Main material: Polypropylene, PVDF or PFA
  • Impeller: closed, half-open and vortex (depending on size)
  • Shaft seal: Munsch REA mechanical seal, single and double seal options
  • Bearings: Silicon carbide
  • Spacer can: PFA

See performance chart

  • Temperature monitoring
  • Various flushing options
  • Casing drain

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch CS Standardised Chemical Pump appeared first on Chem Resist.

]]> https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-cs-standardised-chemical-pump/feed/ 0 Munsch CS-B Standardised Chemcial Pump https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-cs-b-standardised-chemcial-pump/ https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-cs-b-standardised-chemcial-pump/#respond Mon, 23 Aug 2021 11:25:00 +0000 https://www.chemresist.com/products/fluid-transfer/munsch-cs-b-standardised-chemcial-pump/ The post Munsch CS-B Standardised Chemcial Pump appeared first on Chem Resist.

]]>

Performance Data

  • Pump capacity: up to 90 m³/h
  • Total differential head: up to 60 m
  • Operating temperature [t]: -20°C up to +180 °C
  • Operating pressure [p]: up to 16 bar
  • Solids content: up to 5 Vol.-%
  • Particle size: up to 5 mm
  • Diameter of discharge nozzle: DN 25 up to DN 65
  • Drive rating [P]: up to 18,5 kW

Features and Benefits

  • Impeller types: closed, semi-open or vortex designs
  • Quick and precise pump assembly, no adjustment or alignment work needed for the mechanical seal
  • One mechanical seal fits all pump sizes
  • Flexible flushing connections that can be retrofitted at any time.
  • Suitable for applications with high solid load through ceramic components and a variety of flushing options
  • Wetted parts available in thick-walled Polypropylene, PVDF or universally chemical resistant PFA
  • Models
  • Materials
  • Performance Charts
  • Optional Extras
  • 40-25-125
  • 40-25-160
  • 50-32-125
  • 50-32-160
  • 50-32-200
  • 65-50-125
  • 65-50-160
  • 65-40-200
  • 80-65-160
  • 80-50-200
  • Main material: Polypropylene, PVDF and PFA
  • Impeller: closed, semi-open and vortex (depending on size)
  • Shaft seal: Munsch REA mechanical seal, single and double seal options
  • Bearings: Silicon carbide
  • Spacer can: PFA

See performance chart

  • Temperature monitoring
  • Various flushing options
  • Casing drain

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch CS-B Standardised Chemcial Pump appeared first on Chem Resist.

]]> https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-cs-b-standardised-chemcial-pump/feed/ 0 Munsch NP Standardised Chemical Pump https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-np-standardised-chemical-pump/ https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-np-standardised-chemical-pump/#respond Mon, 23 Aug 2021 11:25:00 +0000 https://www.chemresist.com/products/fluid-transfer/munsch-np-standardised-chemical-pump/ The post Munsch NP Standardised Chemical Pump appeared first on Chem Resist.

]]>

Performance Data

  • Pump capacity: up to 1200 m³/h
  • Total differential head: up to 100 m
  • Operating temperature [t]: -20°C up to +110 °C
  • Operating pressure [p]: up to 10 bar
  • Diameter of discharge nozzle: DN 25 up to DN 250
  • Drive rating [P]: up to 200 kW

Features and Benefits

  • Robust metal armour accommodates all allowable system pressures and piping loads
  • Impeller types: closed and semi-open
  • Back pull-out design
  • Quick and precise pump assembly, no adjustment or alignment work needed for the mechanical seal
  • Single or double mechanical seals available
  • Flexible flushing connections that can be retrofitted at any time.
  • Suitable for applications with high solid load through ceramic components and a variety of flushing options
  • Optimum seal chamber geometry without dead flow pockets ensures continuous liquid movement
  • Models
  • Materials
  • Performance Charts
  • Optional Extras
  • 40-25-160
  • 50-32-160
  • 50-32-200
  • 65-40-200
  • 65-40-250
  • 65-40-315
  • 65-50-160
  • 80-65-160
  • 80-50-200
  • 80-50-250
  • 80-50-315
  • 100-65-200
  • 100-65-250
  • 100-65-315
  • 125-80-200
  • 125-80-250
  • 125-100-200
  • 125-100-250
  • 125-100-315
  • 150-125-250
  • 150-125-315
  • 200-150-400
  • 200-200-400
  • Main material: Polypropylene, PE-UHMW and PVDF
  • Impeller:  Polypropylene, PE-UHMW and PVDF
  • Shaft: Steel (plastic coated)
  • Mechanical seal: Silicon carbide

See performance charts

  • Base plate
  • Levelling bolts as an alternative to concrete pads
  • Coupling with / without spacer sleeve
  • Coupling guard
  • Priming pot
  • Thermosiphon buffer system
  • Quench tank
  • Motor overload switch
  • Casing drain

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch NP Standardised Chemical Pump appeared first on Chem Resist.

]]> https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-np-standardised-chemical-pump/feed/ 0 Munsch NP-B Close Coupled Chemical Pump https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-np-b-close-coupled-chemical-pump/ https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-np-b-close-coupled-chemical-pump/#respond Mon, 23 Aug 2021 11:25:00 +0000 https://www.chemresist.com/products/fluid-transfer/munsch-np-b-close-coupled-chemical-pump/ The post Munsch NP-B Close Coupled Chemical Pump appeared first on Chem Resist.

]]>

Performance Data

  • Pump capacity: up to 200 m³/h
  • Total differential head: up to 80 m
  • Operating temperature [t]: -20°C up to +110 °C
  • Operating pressure [p]: up to 10 bar
  • Diameter of discharge nozzle: DN 25 up to DN 65
  • Motor sizes up to 11KW

Features and Benefits

  • Robust metal armour accommodates all allowable system pressures and piping loads
  • Impeller types: closed or semi-open
  • Back pull-out design
  • Quick and precise pump assembly, no adjustment or alignment work needed for the mechanical seal
  • Flexible flushing connections that can be retrofitted at any time
  • Suitable for applications with high solid load through ceramic components and a variety of flushing options
  • Optimum seal chamber geometry without dead flow pockets ensures continuous liquid movement

Munsch pumps

  • Models
  • Materials
  • Performance Charts
  • Optional Extras
  • 40-25-125
  • 40-25-160
  • 50-32-125
  • 50-32-160
  • 50-32-200
  • 65-40-200
  • 65-40-250
  • 65-40-315
  • 65-50-125
  • 65-50-160
  • 80-50-200
  • 80-50-250
  • 80-65-160
  • 100-65-200
  • Main material: Polypropylene, PE-UHMW and PVDF
  • Impeller: Polypropylene, PE-UHMW and PVDF
  • Shaft: Steel (plastic coated)
  • Mechanical seal: Silicon carbide

See performance charts

  • Base plate
  • Levelling elements for installation of base plates without foundation
  • Priming tank
  • Motor overload switch

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch NP-B Close Coupled Chemical Pump appeared first on Chem Resist.

]]> https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-np-b-close-coupled-chemical-pump/feed/ 0 Munsch NPC Standardised Chemical Pump https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-npc-standardised-chemical-pump/ https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-npc-standardised-chemical-pump/#respond Mon, 23 Aug 2021 11:25:00 +0000 https://www.chemresist.com/products/fluid-transfer/munsch-npc-standardised-chemical-pump/ The post Munsch NPC Standardised Chemical Pump appeared first on Chem Resist.

]]>

Performance Data

  • Pump capacity: up to 1200 m³/h
  • Total differential head: up to 80 m
  • Operating temperature [t]: -20°C up to +150 °C
  • Operating pressure [p]: up to 16 bar
  • Diameter of discharge nozzle: DN 40 up to DN 250
  • Drive rating [P]: up to 200 kW

Features and Benefits

  • Robust volute casing with minimum thickness of 10mm without weak welds or joints
  • Impeller designed to give optimum suction through low NPSH requirements
  • Quick and precise pump assembly, no adjustment or alignment work needed for the mechanical seal
  • Available with single or double mechanical seal arrangements
  • Pump can be height adjustable with stainless steel mounting brackets
  • Temperature sensor (PT100) in volute casing at the opening of the drain gives direct measurement
  • Continuous flushing protects the mechanical seal faces from contact with solids

Munsch pumps

  • Models and Max Driving Pressure
  • Materials
  • Performance Charts
  • 40-25-125
  • 40-25-160
  • 50-32-125
  • 50-32-160
  • 50-32-200
  • 65-40-200
  • 65-50-125
  • 65-50-160
  • 80-50-200
  • 80-65-160
  • Main material: Polypropylene, PE-UHMW, PVDF and PFA
  • Impeller: Polypropylene, PE-UHMW, PVDF and PFA
  • Shaft: Stainless steel (coated)
  • Seal rings: Ekasic (advanced silicon carbide)

1450rpm
2900rpm

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about Munsch pumps

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch NPC Standardised Chemical Pump appeared first on Chem Resist.

]]> https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-npc-standardised-chemical-pump/feed/ 0 Munsch NPC-B Close Coupled Chemical Pump https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-npc-b-close-coupled-chemical-pump/ https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-npc-b-close-coupled-chemical-pump/#respond Mon, 23 Aug 2021 11:25:00 +0000 https://www.chemresist.com/products/fluid-transfer/munsch-npc-b-close-coupled-chemical-pump/ The post Munsch NPC-B Close Coupled Chemical Pump appeared first on Chem Resist.

]]>

Performance Data

  • Pump capacity: up to 150 m³/h
  • Total differential head: up to 80 m
  • Operating temperature [t]: -20°C up to +150 °C
  • Operating pressure [p]: up to 16 bar
  • Diameter of discharge nozzle: DN 25 up to DN 65
  • Drive rating [P]: up to 18,5 kW

Features and Benefits

  • Robust volute casing with minimum thickness of 10mm without weak welds or joints
  • Impeller designed to give optimum suction through low NPSH requirements
  • Quick and precise pump assembly, no adjustment or alignment work needed for the mechanical seal
  • Pump can be height adjustable with stainless steel mounting brackets
  • Temperature sensor (PT100) in volute casing at the opening of the drain gives direct measurement
  • Continuous flushing protects the mechanical seal faces from contact with solids
  • Models and Max Driving Pressure
  • Materials
  • Performance Charts
  • 40-125-125
  • 40-25-160
  • 50-32-125
  • 50-32-160
  • 50-32-200
  • 65-40-200
  • 65-50-125
  • 65-50-160
  • 80-50-200
  • 80-65-160
  • Main material: PP, PVDF and PFA
  • Impeller: PP, PVDF and PFA
  • Shaft: Stainless steel
  • Seal rings: EKasic (advanced silicone carbide)

1450rpm
2900rpm

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch NPC-B Close Coupled Chemical Pump appeared first on Chem Resist.

]]> https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-npc-b-close-coupled-chemical-pump/feed/ 0 Munsch NPC Mammut Centrifugal Pump https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-npc-mammut-centrifugal-pump/ https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-npc-mammut-centrifugal-pump/#respond Mon, 23 Aug 2021 11:25:00 +0000 https://www.chemresist.com/products/fluid-transfer/munsch-npc-mammut-centrifugal-pump/ The post Munsch NPC Mammut Centrifugal Pump appeared first on Chem Resist.

]]>

Performance Data

  • Mammut Pump capacity: 1000 m³/h up to 5000m³/h
  • Total differential head: up to 100m
  • Operating Temperature: 0°C up to +100 °C
  • Solids concentration: up to 10% by vol.
  • Particle size: up to 15 mm
  • Motor rating: up to 1MW

Features and Benefits

  • Designed for applications with corrosive and solid-loaded media at flows of 1000 m³/h up to 5000 m³/h and high delivery heads
  • Manufactured in materials to give virtually universal resistance
  • Cast iron armour and synthetic pump casing withstand pressures of up to 10 bar
  • Volute casing has wall thickness of 30mm
  • Impeller designed to give high efficiency through low NPSH requirements
  • During testing safe rotation in the wrong direction as the impeller is fixed to the shaft
  • Quick and precise pump assembly, no adjustment or alignment work needed for the mechanical seal
  • Models and Max Driving Pressure
  • Materials
  • Performance Charts
  • 300-250-315
  • 300-250-400
  • 500-400-700
  • Main material: Polypropylene, PE-UHMW and PVDF
  • Impeller: Polypropylene, PVDF and PFA
  • Shaft: Stainless steel (coated)
  • Seal rings: Ekasic (advanced silicon carbide)

300-250-315
300-250-400
500-400-700

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch NPC Mammut Centrifugal Pump appeared first on Chem Resist.

]]> https://www.chemresist.com/fluid-transfer/pumps/mechanically-sealed-pumps/munsch-npc-mammut-centrifugal-pump/feed/ 0 Munsch TNP-KL Vertical Pump https://www.chemresist.com/fluid-transfer/pumps/vertical-cantilever-pumps/munsch-tnp-kl-vertical-pump/ https://www.chemresist.com/fluid-transfer/pumps/vertical-cantilever-pumps/munsch-tnp-kl-vertical-pump/#respond Mon, 23 Aug 2021 11:25:00 +0000 https://www.chemresist.com/products/fluid-transfer/munsch-tnp-kl-vertical-pump/ The post Munsch TNP-KL Vertical Pump appeared first on Chem Resist.

]]>

Performance Data

  • Pump capacity: up to 700 m³/h
  • Total differential head: up to 90 m
  • Operating temperature [t]: 0°C up to +100 °C
  • Operating pressure [p]: up to 10 bar
  • Diameter of discharge nozzle: DN 25 up to DN 150
  • Setting depths: 400mm to 3000mm (4600mm with suction pipe)
  • Drive rating [P]: up to 55 kW

Features and Benefits

  • Pump casing, casing cover and suspension pipe made of solid plastic to give maximum compatibility corrosive liquids
  • The column pipe and discharge flange can be rotated to virtually any position
  • Standard vertical setting depth can be varied in steps of 100m, intermediate depth also available
  • Impeller available as closed, semi-open and vortex
  • Anti-friction bearing integrated into the bearing lantern allows high loads to the shaft
  • Models
  • Materials
  • Performance Charts
  • Optional Extras
  • 50-32-160
  • 50-32-200
  • 65-40-160
  • 65-40-200
  • 80-50-200
  • 80-50-250
  • 80-50-315
  • 100-65-200
  • 100-65-250
  • 100-65-315
  • 125-80-200
  • 125-100-200
  • 125-100-250
  • 150-125-200
  • 150-125-250
  • 200-150-250
  • Main material: Polypropylene, PE-UHMW and PVDF
  • Impeller: Polypropylene, PE-UHMW and PVDF
  • Shaft: Stainless steel (coated)
  • Plain bearing: Silicon carbide
  • Secondary seal: FPM

See performance charts

  • Suction strainer
  • Suction pipe up to a length of 1600 mm
  • External flushing of plain bearing
  • Mounting plate to specific dimensions
  • Suction strainer and suction pipe
  • Motor overload switch

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch TNP-KL Vertical Pump appeared first on Chem Resist.

]]> https://www.chemresist.com/fluid-transfer/pumps/vertical-cantilever-pumps/munsch-tnp-kl-vertical-pump/feed/ 0 Munsch TNP Vertical Pump https://www.chemresist.com/fluid-transfer/pumps/vertical-cantilever-pumps/munsch-tnp-vertical-pump/ https://www.chemresist.com/fluid-transfer/pumps/vertical-cantilever-pumps/munsch-tnp-vertical-pump/#respond Mon, 23 Aug 2021 11:25:00 +0000 https://www.chemresist.com/products/fluid-transfer/munsch-tnp-vertical-pump/ The post Munsch TNP Vertical Pump appeared first on Chem Resist.

]]>

Performance Data

  • Pump capacity: up to 110 m³/h
  • Total differential head: up to 45 m
  • Operating temperature [t]: 0°C up to +100 °C
  • Operating pressure [p]: up to 10 bar
  • Diameter of discharge nozzle: DN 32 up to DN 80
  • Motor sizes up to IEC motor size up to 132

Features and Benefits

  • Pump casing, casing cover and suspension pipe made of solid plastic to give maximum compatibility corrosive liquids
  • The column pipe and discharge flange can be rotated to virtually any position
  • Standard vertical setting depth can be varied in steps of 100m, intermediate depth also available
  • Impeller available as closed and semi-open
  • • Anti-friction bearing integrated into the bearing lantern allows high loads to the shaft
  • Models
  • Materials
  • Performance Charts
  • Optional Extras
  • 50-32-125
  • 50-32-160
  • 50-32-200
  • 65-40-160
  • 65-40-200
  • 65-40-250
  • 80-50-200
  • 80-50-250
  • 100-65-200
  • 125-80-200
  • Main material: Polypropylene, PE-UHMW and PVDF
  • Impeller: Polypropylene, PE-UHMW and PVDF
  • Shaft: Stainless steel (coated)
  • Plain bearing: Silicon carbide
  • Secondary seal: FPM

See performance charts

  • Suction pipe up to a length of 1600 mm
  • Suction strainer
  • External flushing of plain bearing
  • Motor overload switch

Spares and Service

To help you get the most out of your fluid transfer solutions, we hold significant stock of a broad range of pump spares kits and spare parts, as well as offering routine maintenance, repairs, and priority services.

Learn more about spare parts and kits Learn more about service options

Enquire about this product

Send a message to the Chem Resist sales team for more information.

Alternatively, contact us on +44 1924 499466 or enquiry@chemresist.com.

"*" indicates required fields

Name*
Consent*
Hidden
This field is for validation purposes and should be left unchanged.

The post Munsch TNP Vertical Pump appeared first on Chem Resist.

]]> https://www.chemresist.com/fluid-transfer/pumps/vertical-cantilever-pumps/munsch-tnp-vertical-pump/feed/ 0